220 TON SCHULER HYDRAULIC PRESS

220 TON SCHULER HYDRAULIC PRESS Serial # H/7610 New 2001 Model # HPDZb200 SPECIFICATIONS: Bed Size: 63" x 55" Tee Slotted Ram Face: 63" x 55" Tee Slotted Ram Stroke: 35.4" Maximum Daylight Over 9" Thick Bolster Plate: 36" 24" Wide Windows Maximum Ram Speed: 15.75 Inches Per Second (945 IPM) Minimum Ram Speed: 1.85 Inches Per Minute 69.4 Ton Capacity Bed Cushion with 17.7" Stroke, CNC Controlled 3.3 Ton Ejector in Ram with 9.45" Ejector Stroke Maximum Weight of Upper Die: 6,615 Lbs. Maximum Offset Ram Load Left & Right: 147,520 Lbs. Maximum Offset Ram Load Front & Back: 73,760 Lbs. Allen Bradley Versa View 1500 PLC Control, Pendant Mounted Snap Thru Dampening 200 HP, 3 Phase, 60 Cycle, 480 Volt Main Hydraulic Pump Motor EQUIPPED WITH: Heat Exchanger & Oil Cooler Schuler Feed Line, Feeding from the Back to the Front Schuler Servo Roll Feed, New 2001, Type WV-KR-160-1050 Strip Width: 6" Minimum to 36" Maximum Strip Thickness: .035" Minimum to .055" Maximum Feed Length: .004" Minimum to 393.7" Maximum Power Adjustable Passline Height Power Elevation to Material Infeed Tray Rollers Siemens Servo Drive Motor Schuler Straightener, New 2001, Model RCS-6-70/160-1050 Strip Width: 6" Minimum to 36" Maximum Strip Thickness: .035" to .055" Maximum (6) Straightening Rolls with Manual Adjustment & Dials Indicator Readout Pinch Rolls on Exit Side Materials Width Guide Rollers with Manual Adjustment Top Half of Straightener has Power Lift for Material Loading & Maintenance Power Raise & Lower to Material Infeed Tray & Rollers Loop Control Arm 3.7 KW SEW Eurodrive Motor, Wired 3 Phase, 60 Cycle, 277-480 Volts Schuler Motorized Uncoiler, New 2001, Type HES-12-1000 10,000 Lb. Weight Capacity Strip Width: 6" Minimum to 36" Maximum Maximum Coil O.D.: 43.3" Power Expansion Range: 18.5" to 20.9" (6) Coil Keeper Arms Hold Down Arm, Hydraulic Raise & Lower with Adjustable Pressure Schuler Motorized Coil Arm with: (2) 100" Long Sections of Track Schuler Operator Control Console for the Feed Line with: Hand Held Pendant, Auto Threading & Job Memory SPR-2000 Sproller Stock Lubricator DIMENSIONS: Press Laying Down: 233" L x 127" W x 86" H x 59,000 Lbs. Hydraulic System: 11' L x 5-1/2' W x 9' H x 11,000 Lbs. Servo Roll Feed: 82" F-B x 78" L-R x 83" H x 5,900 Lbs. Straightener: 100" F-B x 70" L-R x 80" H x 6,100 Lbs. Uncoiler: 78" L x 60" W x 112" H with Hold Down Arm Raised x 4,800 Lbs. Skid with Fence Enclosure for Feed Line: 160" L x 84" W x 44" H Hydraulic System for Uncoiler Sitting on Skid: 45" L-R x 48" F-B x 24" H Electric Control Cabinet with AC Unit: 126" L x 30" W x 89" H Schuler Electric Switchgear Cabinet, 480 Volts: 71" L x 21" W x 89" H Skid with Stock Lubricator & Feedline Pendant Control: 45" L-R x 48" F-B x 24" H Schuler Operator Control Console Laying Down on Skid: 43" L-R x 33" F-B x 24" H Catwalk, Ladder & Support Legs Banded Together: 10' L x 63" W x 70" H Catwalk, Misc. Hydraulic Lines & PLC Control: 136" L x 39" W x 53" H Skid with Support Legs Banded Together: 13' L x 4' W x 4' H Skid with Misc. Banded to Skid: 60" L x 40" W x 12" H x 100 Lbs. Skid with Radiator: 48" L x 45" W x 12" H x 100 Lbs. Coil Car: 67" L x 65" W x 29" H (2) 100" Long Pieces of Track for Coil Car: 100" L x 5" W x 2" H Plastic Basket with Wiring: 32" L x 30" W x 36" H Skid with Press Cushion: 4' L x 4' W x 33" H Wire Basket with Hydraulic Lines & Operator Pedestal: 48" L x 40" W x 36" H NOTE: Photo shows machine while in operating plant. Machine has been dissmantled and moved to heated warehouse and is ready to be reloaded on trucks.