The AMCO Z5030A Upright Drill Press is a robust vertical drilling machine designed for precision metalworking tasks. It offers a maximum drilling capacity in mild steel of 1.18 inches (30 mm) and supports tapping up to approximately M20 (0.79 inches). Its substantial column diameter is around 4.72 inches (120 mm), providing solid structural stability. The spindle enables a travel distance of about 5.31 inches (135 mm) and operates at two fixed speeds, 960 and 1450 rpm, powered by a 1.1 kW to 1.5 kW (approximately 1.5 to 2 hp) motor, with multiple voltage options including 220 V, 380 V, 420 V, and 440 V. Key dimensional clearances include a distance from spindle axis to column surface of approximately 12.6 inches (320 mm), a maximum spindle nose to table distance of 20.47 inches (520 mm), and spindle nose to base up to 43.3 inches (1100 mm), allowing accommodation of various workpiece sizes. The machine's working table measures about 14.7 by 14.7 inches (374 x 374 mm), and the base plate is similarly sized at roughly 14.6 by 14.2 inches (370 x 360 mm), both equipped with T-slots (0.55 to 0.63 inches wide) for secure workpiece mounting. The table can tilt ±45 degrees to facilitate angled drilling operations. The spindle uses a Morse Taper #3 (MT3) and offers three feed step settings with increments from 0.1 to 0.3 mm per revolution (0.004 to 0.012 inches). The drill press weighs approximately 1058 lbs (480 kg) net, emphasizing its solid build for industrial or workshop environments. This combination of precision, capacity, and versatility makes the AMCO Z5030A suitable for multi-functional drilling, reaming, tapping, and milling tasks in metal fabrication.