The CASE 1021F XR Wheel Loader is a heavy-duty machine designed for high productivity and durability. Powered by a turbocharged 6-cylinder FPT F2CFE614C engine with a displacement of 531 cu in (8.7 liters), it delivers 320 hp gross power and 296 hp net power at 1800 rpm, with a maximum torque rise of 49% at 1200 rpm, optimizing fuel efficiency and performance. The loader features a 4-speed powershift transmission with 4 forward and 3 reverse gears, allowing a maximum forward speed of 23.2 mph (37 kph) and reverse speed of 16.1 mph (26 kph). Equipped with a robust hydraulic system delivering 93 gal/min pump flow, it provides fast cycle times with a raise time of 6.2 seconds, dump time of 1.3 seconds, and lower time of 2.6 seconds, enabling simultaneous lift and tilt operations without performance loss. The bucket specifications include a heaped capacity of 4.8 cu yds (3 m³) and struck capacity of 4.1 cu yds (3 m³) with a 10.5 ft (3 m) width, facilitating efficient loading and material handling. Dump clearance at max raise is approximately 12.3 ft (4 m) with a hinge pin height of 15.9 ft (5 m). The machine’s operating weight is around 56,452 lbs (25,607 kg) for stable operation. Its dimensions include a wheelbase of 11.7 ft (3.6 m), width over tires of 9.9 ft (3 m), and height to the top of the cab at 11.8 ft (3.6 m). Ground clearance is 1.7 ft (0.5 m), and it features a tight turning radius of 24 ft (7.3 m), ensuring maneuverability in confined job sites. Fuel capacity is 125 gallons (473 liters), supporting extended operations. This loader’s front and rear axles have fluid capacities of 13.5 gallons each, and the hydraulic system holds 66 gallons (250 liters) of fluid. Tire size is 26.5R25. Overall, the 1021F XR combines power, speed, and advanced hydraulics for efficient heavy material handling in construction and industrial applications.