The CASE 865B VHP Motor Grader is a heavy-duty grading machine powered by a turbocharged FPT F4HE9687C six-cylinder diesel engine delivering 205 net horsepower at 2200 rpm and 686 lb-ft of torque at 1500 rpm. Featuring a 14-foot moldboard with 0.9-inch thickness and 20,626 pounds of blade down pressure, it achieves a maximum cutting depth of 28 inches with side shift capability of 21 inches left and 27 inches right. The 69-inch diameter circle provides full 360-degree rotation with 17.5 inches of maximum lift above ground. This machine measures 28 feet overall length with an 8.1-foot width over tires and 10.4-foot height to the top of the IsoMount cab, delivering a compact 23.8-foot turning radius for precise positioning. The powershift transmission offers eight forward and four reverse gears, enabling maximum speeds of 26.6 mph forward and 17.7 mph in reverse. Operating weight totals 35,993 pounds with 12,129 pounds on the front axle and 23,864 pounds on the rear tandem axle, supported by 17.5-25 tires. The load-sensing hydraulic system produces 49 gallons per minute at 2200 rpm with a 50.2-gallon fluid capacity. Hydrostatic steering with front articulation of 25 degrees and front axle oscillation of 15.3 degrees enhances maneuverability on uneven terrain. The 90-gallon fuel capacity and comprehensive fluid capacities across transmission (25 gallons), hydraulic (50.2 gallons), and engine systems ensure extended operational periods between servicing.