Engine Power (hp)
155
Blade Widht (ft)
12.1
Blade Height (in)
24.1
Max Lift Above Ground (in)
18.0
Depth of Cut (in)
30.6
Overall Lenght (ft)
27.2
Overall Width (ft)
12.1
Weight (lbs)
28840
Technical Specifications
- Blade Tip Angle - Front: 40 degrees
- Blade Tip Angle - Rear: 5 degrees
- Max Lift Above Ground: 18 inches
- Max Reach Outside Tires - Left: 72.5 inches
- Max Reach Outside Tires - Right: 75.3 inches
- Shift Left: 24.7 inches
- Shift Right: 24.8 inches
- Blade Base: 8.6 feet
- Front Ground Clearance: 1.2 feet
- Rear Ground Clearance: 1.2 feet
- Tandem Axle Wheelbase: 5 feet
- Max Power: 155 hp
- Net Power Gear 1-2: 135 hp
- Net Power Gear 4-6: 155 hp
- Net Power Gear 5-6: 155 hp
- Net Power Gears 7-8: 155 hp
- Net Torque Gears 7-8: 625.5 lbs-ft
- Number of Cylinders: 6
- Power Measured @: 2000 rpm
- Torque Measured @: 1000 rpm
- Front Axle Ground Clearance: 2 feet
- Oscillation - Total: 32 degrees
- Wheel Lean: 18 degrees
- Pump Flow: 38.1 gpm
- Relief Valve Pressure: 3500 psi
- Blade Down Pressure: 21653.9 lbs
- Blade Pull at Max Weight: 25364.2 lbs
- Max Depth of Cut: 30.6 inches
- Moldboard Height: 24.1 inches
- Moldboard Thickness: 0.9 inches
- Moldboard Width: 12.1 feet
- Side Shift Left: 20.7 inches
- Side Shift Right: 26 inches
- Alternator Supplied Amperage: 35 amps
- Circle Gearbox Fluid Capacity: 1.8 gallons
- Cooling System Fluid Capacity: 10.4 gallons
- Operating Voltage: 24 volts
- Std Operation Weight - Front Axle: 8242 lbs
- Std Operation Weight - Rear Axle: 20598 lbs
- Tandem Case Fluid Capacity (each): 12.7 gallons
- Tire Size: 13-24 10 PR (G-2)
- Articulation Angle: 20 degrees
- Max Speed - Forward: 26.1 mph
- Max Speed - Reverse: 20.6 mph
- Number of Gears - Forward: 8
- Number of Gears - Reverse: 6
- Transmission Type: direct drive, powershift
Data may contain nonconformities, defects, errors, or omissions and should be verified before use. All data that Aucto provides is "as is" without any guarantees of any kind. If you see data that looks to be incorrect or needs to be updated, please let us know by emailing us at support@aucto.com with the product name, page URL, the incorrect data and updated values (if available). We will try our best to update inaccurate data as quickly as possible.
If this data is incorrect, please let us know by
clicking here
.
