Engine Power (hp)
200
Blade Widht (ft)
8.3
Blade Height (in)
27.1
Max Lift Above Ground (in)
17.8
Depth of Cut (in)
30.4
Overall Width (ft)
8.3
Weight (lbs)
51325.9
Technical Specifications
- Blade Tip Angle - Front: 40 degrees
- Blade Tip Angle - Rear: 5 degrees
- Max Lift Above Ground: 17.8 inches
- Max Reach Outside Tires - Left: 87.6 inches
- Max Reach Outside Tires - Right: 89.1 inches
- Shift Left: 33.4 inches
- Shift Right: 34.7 inches
- Blade Base: 8.3 feet
- Tandem Axle Wheelbase: 5 feet
- Max Power: 200 hp
- Net Power Gear 1-2: 180 hp
- Net Power Gear 5-6: 200 hp
- Net Power Gears 7-8: 200 hp
- Net Torque Gears 7-8: 840.9 lbs-ft
- Number of Cylinders: 6
- Power Measured @: 2000 rpm
- Torque Measured @: 1000 rpm
- Oscillation - Total: 32 degrees
- Wheel Lean: 18 degrees
- Pump Type: Axial Piston
- Blade Down Pressure: 30,441.5 lbs
- Blade Pull at Max Weight: 44,249 lbs
- Max Depth of Cut: 30.4 inches
- Moldboard Height: 27.1 inches
- Moldboard Thickness: 1 inch
- Side Shift Left: 33.6 inches
- Side Shift Right: 37.2 inches
- Circle Gearbox Fluid Capacity: 1.9 gallons
- Cooling System Fluid Capacity: 10.1 gallons
- Hydraulic System Fluid Capacity: 21.2 gallons
- Max Operation Weight - Front Axle: 18,322.7 lbs
- Max Operation Weight - Rear Axle: 33,003.2 lbs
- Max Operation Weight - Total: 51,325.9 lbs
- Operating Voltage: 24 volts
- Rear Diff/Final Drive Fluid Capacity: 12.5 gallons
- Std Operation Weight - Front Axle: 10,117.1 lbs
- Std Operation Weight - Rear Axle: 25,774.3 lbs
- Tandem Case Fluid Capacity (each): 17 gallons
- Articulation Angle: 20 degrees
- Turning Radius: 24.3 feet
- Number of Gears - Forward: 8
- Number of Gears - Reverse: 6
Data may contain nonconformities, defects, errors, or omissions and should be verified before use. All data that Aucto provides is "as is" without any guarantees of any kind. If you see data that looks to be incorrect or needs to be updated, please let us know by emailing us at support@aucto.com with the product name, page URL, the incorrect data and updated values (if available). We will try our best to update inaccurate data as quickly as possible.
If this data is incorrect, please let us know by
clicking here
.
