The Caterpillar 928F is a robust wheel loader powered by a turbocharged 3116 six-cylinder engine with a displacement of 402.8 cu in, delivering 128.1 hp gross and 120 hp net at 2200 rpm. It features a power shift transmission with four forward and three reverse gears, enabling a maximum travel speed of 24.5 mph forward and 13.1 mph in reverse. The loader can exert a high breakout force of 22,233 lbs, supporting heavy material handling tasks. Its bucket capacity is 2.7 cubic yards heaped and 2.3 cubic yards struck, with an 8.4-foot width that facilitates handling substantial loads efficiently. The hinge pin reaches a maximum height of 12.2 feet, while the dump clearance at maximum raise is 9 feet, allowing for effective discharge in loading operations. The wheelbase measures 9.5 feet, and the overall length with the bucket on the ground is 22.8 feet, making it maneuverable yet stable on job sites. Hydraulically, the system has a pump flow capacity of 36.8 gallons per minute, with quick cycle times—1.1 seconds dump time, 2.3 seconds lower time, and 6.2 seconds raise time—ensuring responsive operation. The machine operates on 24 volts with a 50-amp alternator, and has a comprehensive fluid capacity including 50 gallons fuel, 26.5 gallons hydraulic fluid, and specific axle and transmission fluid volumes. With ground clearance of 1.1 feet and an operating weight of approximately 24,625 pounds, the 928F supports heavy-duty tasks with stability and power, complemented by tire sizes of 15.5 and 20.5X25. The cab height is 10.5 feet, contributing to operator visibility and comfort.