The Caterpillar 928G is a versatile wheel loader powered by a 3116T engine delivering 125 net horsepower and 143 rated net horsepower. This mid-sized machine features a bucket capacity ranging from 2.5 to 3 cubic yards with a breakout force of 25,849 pounds, making it suitable for material handling and loading applications. The loader achieves a maximum bucket pin height of 12.4 feet at full lift with a 45-degree dump angle, providing a dump clearance of 9.5 feet. Operating at a gross weight of approximately 27,140 pounds, the machine maintains a compact footprint with overall dimensions of 23.9 feet in length, 8.1 feet in width, and 10.8 feet in cab height. Its hydraulic system operates at 3,600 psi relief pressure with a pump flow of 40.15 gallons per minute, enabling rapid cycle times of 1.2 seconds for dumping, 2.8 seconds for lowering, and 6.1 seconds for raising. The transmission provides four forward gears and three reverse gears, with a maximum forward speed of 22.9 mph and reverse speed of 15.3 mph. The machine features articulation capability of 40 degrees with an 11-degree rear axle oscillation for enhanced maneuverability over uneven terrain. The 928G incorporates certified ROPS and FOPS cab protection meeting SAE J1040 and ISO 3471-1994 standards.