This vertical machining center features a robust work table measuring 87" in length and 20" in width, capable of supporting workpieces up to 2,640 lbs, suitable for heavy-duty machining tasks. It is equipped with a #50 spindle taper oriented vertically, delivering up to 1,720 RPM and powered by a 15 HP motor (30-minute rating), providing substantial torque for cutting through tough materials. The tooling system uses a manual tool carrier with a single tool and zero tool change chip time, emphasizing simplicity and reliability. The machine operates on three axes (X, Y, Z) with travel distances of 63", 24", and 28" respectively, allowing significant machining envelope for various part sizes. The rapid traverse and max feed rates are not specified, but the substantial axis travels support flexible machining operations. The absence of a U axis indicates the machine is a standard 3-axis vertical machining center without additional rotary or lateral movements. This setup is geared for precision vertical milling, drilling, and boring, suitable for custom, low to medium volume production. It employs a manual tool change system, making it ideal for applications where tool change frequency is low or operator intervention is preferred. The large table size and high maximum load capacity enable machining of large, heavy components with stability. Ideal for industries requiring rigid, heavy-duty vertical milling capabilities with moderate spindle speeds and horsepower.