The 2024 Dynapac CC900G is a compact static smooth drum roller designed for small-scale compaction tasks such as pavements, cycle paths, and parking areas. It features a 35 to 35.5-inch wide steel drum with a diameter of 23 inches and a 0.4-inch thick shell, providing effective surface compaction. Powered by a Honda GX630RH QYD 4-stroke, 2-cylinder, air-cooled petrol engine delivering 19 hp at 3,000 rpm, the roller offers reliable and efficient performance. The machine's operating mass is approximately 2,900 lbs (2,800 lbs with ROPS), with a fuel tank capacity of 6 gallons. It achieves speeds from 0 to 5 mph and has a maximum theoretical gradeability of 35%, suitable for uneven terrains. The roller incorporates hydrostatic drive and steering with a ±34° steering angle for maneuverability, supported by a 53-inch wheelbase and vertical oscillation of ±6° for smooth operation on varying surfaces. The overall dimensions are 83 inches in length, 38 inches in width, and 91 inches in height with ROPS. Ground clearance is 10 inches, and curb clearance is 18 inches, while the turning radius ranges from 6 to 9 feet, facilitating tight cornering. The Dynapac CC900G’s static smooth drum provides consistent compaction force without vibration on the rear drum, optimized for precise finish work. This roller is a practical choice for contractors needing a versatile, easy-to-operate machine for confined areas and smaller compaction projects.