Table Size (in)
144x151.6
X-Axis (in)
151.6
Y-Axis (in)
13.8
Z-Axis (in)
11.0
Power (hp)
10.0
Spindle Speed RPM)
24000
Taper
HSK F63
Machine Weight (lbs)
4505
Technical Specifications
- PC Based Control Windows XP
- Defender Light Curtains
- Machining 3 Sides of Profile
- Linear Guide for X Y Z Travel
- Adjustable Pneumatic Clamps
- Automatic Tool Changer with 5 Top Tool Holders & 1 Angle Head
- Horizontal Pneumatic Clamps
- Pulse Spray Mist Coolant System
- Tool Height Gauge
- Hand Held Mobile Control
- Standard Table Area 144 inches
- Table Capacity, X-Axis Routing Capacity Face Side 151.6 inches
- Table Capacity, Y-Axis 13.75 inches
- Routing Capacity Top 9 inches
- Routing Capacity Front 7 inches
- Table Capacity Z-Axis 11 inches
- Routing Capacity Top 11 inches
- Step Over Capacity 7.3 inches
- Rapid Positioning Y-Z Axes (Max.) 1,176 inches/Min
- Rapid Positioning X-Axes (Max.) 1,968 inches/Min
- Max. Spindle Speed 24,000 RPM
- Power Output, Router Spindle 10 HP, 480 Volt, 3 Phase
- Max. Profile Height/Step Over Max. 11 inches
- Software Forced Front/Rear Machining No Step Over from Front to Rear of Profile
- Head Runs Around Zero Point
- Max. Diameter of Tooling 2.4 inches
- Max. Diameter of Disk Cutter Manual 7.87 inches
- Max. Diameter of Disk Cutter Automatic 3.62 inches
- Max. Air Pressure 102 PSI
- Max. Length of Tooling (Top) 7.9 inches
- Max. Diameter Shaft for ER-32 Collet 0.78 inches
- Max. Diameter Shaft for ER-16 Collet (Angle Head Cap Collet) 0.511 inches
- Max. Diameter Shaft for 077 Collet 0.394 inches
- Tapping Capacity Up to (with Float Collet - ER32 Collet Size) 0.375 inches @ 65% Thread
- Tool Chuck HSK F63
- Tool Holder for Auto Tool Change 6 Position
- Overall Machine Base Dimensions 62 inches x 49.5 inches
- Light Curtain Width 181.3 inches L x 88 inches H
- Machine Weight (Approx) 4,505 lbs
Data may contain nonconformities, defects, errors, or omissions and should be verified before use. All data that Aucto provides is "as is" without any guarantees of any kind. If you see data that looks to be incorrect or needs to be updated, please let us know by emailing us at support@aucto.com with the product name, page URL, the incorrect data and updated values (if available). We will try our best to update inaccurate data as quickly as possible.
If this data is incorrect, please let us know by
clicking here
.
