The TS25 Upright Drill Press is a robust geared-head machine designed for precise drilling in mild steel and cast iron, featuring a 19.68-inch swing and a 2.44-inch diameter quill with 4.72 inches of spindle travel. It is powered by a 1.5 HP motor operating on 230/460V three-phase power, delivering 8 selectable speeds ranging from 90 to 3,360 RPM via a dual speed range selector (high/low). The spindle uses a 3 Morse Taper (3MT) for secure tool mounting. The drill press supports a maximum drilling capacity of 1.0 inch in mild steel and 1.18 inches in cast iron, making it suitable for medium-duty industrial applications. Its construction includes a cast iron base (22 x 15 inches), column (approximately 4 inches diameter), and head for enhanced rigidity and vibration damping. The adjustable worktable features 1/2-inch wide T-slots to accommodate fixtures and workpieces and can be set at various heights. Additional industrial-grade features include a manual spindle reversing switch, adjustable depth stop with scale, safety drill guard equipped with a microswitch, and an emergency stop button—with some models offering a foot-operated stop switch. An automatic tool ejector enhances operator convenience. The machine weighs approximately 298 lbs, with shipping weight near 353 lbs, and dimensions around 20 x 32 x 48 inches, suitable as a bench or floor model. Compliance with CE safety standards and a thermomagnetic motor breaker further ensure safe and reliable operation, making the TS25 a versatile solution for workshop and manufacturing environments requiring dependable, repeatable drilling performance.