The Wacker Neuson 280 is a compact and powerful wheel loader designed for versatile material handling tasks. It features a 49 hp (37 kW) 4-cylinder 4TNV88 engine that delivers reliable performance. The loader’s hydrostatic continuously variable axial-piston transmission enables smooth operation with a maximum forward speed of 12 mph (19 kph). It has an operating weight of approximately 7,055 lbs (3,200 kg) and a static tipping load of 5,159 lbs (2,340 kg), ensuring stability during heavy lifts. The machine’s bucket has a breakout force of 6,137 lbs (2,784 kg) and a 1.5 cubic yard (1 cubic meter) heaped capacity, suitable for handling a variety of materials efficiently. At maximum lift, the hinge pin height reaches 10 ft (3 m), with a dump clearance of about 7.6 ft (2 m), enabling effective discharge over obstacles. The bucket cycle times are optimized with a dump time of 0.6 seconds, raise time of 4.8 seconds, and lower time of 3.7 seconds, driven by a gear pump delivering 13.8 gal/min (49 l/min) at a relief valve setting of 3,481 psi. Dimensionally, the loader measures 15.2 ft (5 m) in length with the bucket on the ground, 7.7 ft (2 m) in cab height, 5 ft (2 m) width over the tires, and an 11.2 ft (3 m) turning radius. The wheelbase is 5.8 ft (2 m), with 12.5-18 tires and 28° rear axle oscillation for enhanced maneuverability on uneven terrain. Fuel capacity is 15.9 gallons (57 liters), and hydraulic fluid capacity is 17.2 gallons (64 liters), supporting extended operation cycles without frequent refueling or maintenance breaks. This loader is well-suited for construction, landscaping, and material handling applications requiring compact size without sacrificing power or efficiency.