The Hercu 25G is a gas-powered forklift engineered for versatile material handling across indoor and outdoor applications. Powered by a G3900 engine producing 79.2 horsepower at 2500 rpm, this machine features a 244.1 cubic inch displacement and operates at a maximum speed of 12.5 mph, making it suitable for moderate-duty warehouse and distribution center operations. The forklift boasts a robust load capacity of 5,511.6 pounds at a 19.7-inch load center, with dual two-stage mast sections enabling precise vertical positioning. Its dual lift and lower speeds of 98.5 feet per minute provide efficient cycle times for repetitive stacking operations. The compact design includes a 5.2-inch ground clearance and 4-foot overall width, facilitating maneuvering through standard warehouse aisles with an 8.6-foot turning radius. The mast achieves a maximum fork height of 10.9 feet, accommodating multi-level storage configurations. Weighing 10,383.8 pounds, the machine is supported by four pneumatic tires—two front and two rear—ensuring stable operation on various floor surfaces. The overhead guard reaches 7.3 feet in height, with the mast fully lowered at 7.4 feet, optimizing headroom compatibility. Advanced tilt capabilities provide 5 degrees forward and 12 degrees rearward mast tip movement, enhancing load control and operator safety. The 9.2-foot length to fork face and 5.7-foot wheelbase establish a stable platform for demanding warehouse tasks, while pneumatic tire construction delivers cushioning and traction benefits for prolonged operational effectiveness.