The Hyster H40FT Gas forklift is a robust, sit-down rider model engineered for demanding material handling tasks in industrial and warehouse environments. This forklift features a 4-cylinder FE engine with a displacement of 122.1 cubic inches, delivering 46 horsepower and 104 lb-ft of torque at 1800 rpm, powered by gasoline for reliable performance. The truck’s operating weight is 7985.2 lbs, supported by a pneumatic tire configuration with two front and two rear wheels, ensuring stability and traction on varied surfaces. With a ground clearance of 5.2 inches, a wheelbase of 5.4 feet, and a turning radius of 7.1 feet, the H40FT offers excellent maneuverability in tight spaces. The overall width is 3.8 feet, and the mast lowered height is 7.2 feet, while the height to the top of the overhead guard is 7.1 feet, making it suitable for use in standard warehouse doorways and racks. The maximum fork height reaches 10.9 feet, with a load capacity of 4001.4 lbs at a 24.1-inch load center. The mast provides a lift speed of 110 ft/min and a lower speed of 83 ft/min, with a maximum fork spread of 43.3 inches. Mast tilt is 6 degrees forward and 10 degrees rear, enhancing load control. The forklift’s maximum travel speed is 7 mph (11 kph), and the length to the fork face is 8.2 feet, providing efficient reach and handling for a wide range of loads.