The Hyundai HL730XTD-7 is a robust wheel loader designed for versatile material handling with a heaped bucket capacity of 2.4 cubic yards (2 m³) and breakout force of 20,990 lbs (9,521 kg). It features a turbocharged B3.9C diesel engine delivering 125 hp gross power (119 hp net) at 2200 rpm with 4 cylinders, providing efficient torque of 373 lb-ft at 1300 rpm. The loader operates on a full automatic power-shift, countershaft transmission with 4 forward and 3 reverse gears, reaching up to 23 mph forward and 14.5 mph reverse speeds. The machine’s hydraulic system uses a helical gear-type pump with a flow capacity of 37 gallons per minute (140 liters/min) and a relief valve set at 2990 psi, enabling smooth boom raise and dump operations with cycle times of 5.4 seconds (raise), 1 second (dump), and 2.6 seconds (lower). It has an operating weight of approximately 21,830 lbs (9,902 kg) and features 17.5-25 12PR L3 tires. Dimensionally, the wheel loader has a ground clearance of 1.3 ft (0.4 m), a height to top of cab of 10.5 ft (3.2 m), and a hinge pin maximum lift height of 13.1 ft (4 m). Its length with bucket on the ground is 23.7 ft (7.2 m), and it has a wheelbase of 9.1 ft (2.8 m) with a width over tires of 8.1 ft (2.5 m). Dump clearance at maximum lift is 10.1 ft (3.1 m) with a reach of 3.4 ft (1 m). The rear axle oscillates at 24°, enhancing stability on uneven terrain. Fuel capacity is 53.4 gallons (201 liters), and hydraulic fluid capacity is 42.3 gallons (159 liters), supporting extended operation. This loader is suited for construction, landscaping, and agricultural tasks demanding reliable load management and maneuverability in various environments.