The Hyundai HL730XTD-7A is a robust wheel loader engineered for heavy-duty material handling. It features a turbocharged Cummins QSB4.5 engine delivering a gross power of 125 hp (93 kW) and a net power of 119 hp (89 kW), optimized for efficient performance. The loader’s hydraulic system includes a helical gear pump with a flow capacity of 37 gallons per minute (140 l/min) and a relief valve set at 2990 psi, enabling fast cycle times with a 5.6-second raise, 1-second dump, and 2.8-second lower times. Its bucket offers a heaped capacity of 2.4 cubic yards (2 m³) and a breakout force of 20,990 lbs (9,521 kg), suitable for heavy lifting and loading tasks. The dump clearance at maximum raise is 10.1 ft (3 m), with a hinge pin height of 13.1 ft (4 m), allowing for effective unloading into trucks or hoppers. Dimensionally, the wheel loader measures 23.7 ft (7 m) in length with the bucket on the ground and has a wheelbase of 9.1 ft (3 m). The height to the top of the cab is 10.5 ft (3 m), width over tires is 8.1 ft (2 m), and ground clearance is 1.3 ft (0 m). It runs on 17.5-25 12PR L3 tires and has a rear axle oscillation of 24 degrees, enhancing stability on rough terrain. The HL730XTD-7A features a full automatic powershift transmission with four forward and three reverse gears, reaching a maximum forward speed of 22.4 mph (35 kph) and reverse speed of 14.4 mph (23 kph). Its operating weight is approximately 21,830 lbs (9,902 kg), with a fuel capacity of 53.4 gallons (201 l) and a 24-volt electrical system. This combination of power, hydraulic efficiency, and maneuverability makes it a versatile loader for construction and industrial applications.