The John Deere 344E is a robust wheel loader powered by a naturally aspirated 4-cylinder John Deere 4045D engine with a displacement of 276 cu in, generating 80 hp gross (75 hp net) at 2200 rpm and 215 lb-ft of torque at 1200 rpm. It weighs approximately 16,014 lbs (7,264 kg) and features a hydrostatic transmission with 2 forward and 2 reverse gears, reaching maximum speeds of 18.6 mph (29 kph) in either direction. The loader’s bucket has a heaped capacity of 1.7 cubic yards (1.3 struck) and a width of 7.8 ft (2 m), delivering a breakout force of 14,595 lbs (6,620 kg). It provides a maximum hinge pin height of 11.3 ft (3.4 m) and a dump clearance at max raise of 8.9 ft (2.7 m), with a reach of 2.7 ft (0.8 m) at max lift and dump. Dimensionally, the 344E measures 19.8 ft in length with the bucket on the ground, 7.2 ft in width over tires (size 15.5-25), and has a cab height of 10.2 ft. The wheelbase is 11.7 ft, offering a turning radius of 14.5 ft. Ground clearance stands at 1.3 ft. The hydraulic system uses a gear pump with a flow capacity of 32.3 gal/min (121 l/min) at 2500 psi, and cycle times include 5.3 seconds to raise, 1 second to dump, and 3 seconds to lower. Fluid capacities include 32 gallons fuel, 10.6 gallons hydraulic, 3.5 gallons engine oil, and 9 gallons cooling system fluid. The John Deere 344E is designed for efficient heavy-duty construction and material handling, balancing power, maneuverability, and hydraulic efficiency for versatile wheel loader performance.