The Kato HD700V II is a mid-sized hydraulic excavator designed for versatile earthmoving tasks, featuring three boom and stick configurations optimized for different operational demands. Option 1 offers a maximum cutting height of 31.7 ft and a digging depth of 20.1 ft, while Option 2 increases these dimensions to 32.1 ft cutting height and 21.8 ft digging depth. Option 3, the longest reach configuration, provides a maximum cutting height of 33.7 ft and digging depth of 25.1 ft, enabling extensive reach and deep excavation capabilities. The machine’s maximum bucket capacity is 1.6 cubic yards, with a typical reference capacity of 1.1 cubic yards. Its overall dimensions include a shipping height of 9.6 ft, a length of 31.4 ft, a track gauge of 7.3 ft, and a width to outside of tracks at 9.3 ft, while ground clearance measures 1.5 ft. Powered by a turbocharged 6D31T engine with a displacement of 302 cubic inches, the Kato HD700V II delivers 123.4 hp at 2200 rpm and maximum torque of 318 lb-ft at 1700 rpm. The hydraulic system flows at 121.6 gallons per minute under a relief pressure of 4760 psi, supported by a 74-gallon capacity system fluid reservoir. The operating weight is 40,786 lbs. The undercarriage features 48 shoes per side, 7 track rollers per side, and a drawbar pull capacity of 39,000 lbs, allowing a maximum travel speed of 3.5 mph. Swing speed is rated at 13.5 rpm, with a tail swing radius of 9.2 ft, contributing to efficient maneuverability on site. Electrical operation runs on a 24-volt system with a 30-amp alternator, enabling reliable performance across tasks and environments.