The Liugong CLG835 II is a robust wheel loader designed for efficient material handling, featuring a 130 hp (97 kW) QSB5.9-C130 six-cylinder turbocharged engine with 360.1 cu in displacement. It delivers a breakout force of 21,020 lbs (9,534 kg) and comes equipped with a 2.3 cubic yard (2 m³) heaped bucket with a width of 8.1 ft (2 m), providing excellent load capacity for a variety of applications. The loader has a maximum dump clearance of 9.6 ft (3 m) at full raise and a hinge pin max height of 12.3 ft (4 m), enabling high dumping performance. Its dimensions support agile operation, with a wheelbase of 9.2 ft (3 m), ground clearance of 1.6 ft (0.5 m), and width over tires of 7.6 ft (2 m). Total length with bucket on ground is 22.8 ft (7 m), and the loader features a turning radius of 16.3 ft (5 m). The operating weight is approximately 25,574 lbs (11,600 kg), and tire size is 17.5-25. The transmission is a counter shaft type powershift with four forward and three reverse gears, offering a max forward speed of 23 mph (37 kph) and reverse speed of 14.3 mph (23 kph). The hydraulic system provides quick cycle times with dump at 1.1 seconds, lower at 2.9 seconds, and raise at 4.8 seconds under a relief valve pressure of 2,320.7 psi. Fuel capacity is 52.9 gallons (197 liters), with hydraulic fluid capacity of 39.7 gallons (148 liters), supporting extended operation cycles and maintenance intervals. Overall, the CLG835 II combines powerful performance, efficient hydraulics, and practical dimensions for versatile, heavy-duty construction tasks.