71.88

14.96

9.00

2000

384.00

112.00

15432

- Arm Length: 5.9 ft - Power: 9.0 hp - RPM: 2,000 RPM - Weight: 15,432 lbs - X-Travel: Approx. 32 ft - Working Capacity: - Drilling in steel (600 MPa tensile strength): 2.48 in - Drilling in cast iron (250 MPa tensile strength): 3.14 in - Boring capacity in steel (600 MPa tensile strength): 3.93 in - Tapping Capacity: - In steel (600 MPa tensile strength): M64 x 4 - In cast iron (250 MPa tensile strength): M85 x 4 - Maximum distance spindle centerline to column shell guideways: 78.74 in - Minimum distance spindle centerline to column shell guideways: 15.19 in - Max height of spindle nose above baseplate: - Morse No 5 taper spindle: 73.42 in - Morse No 6 taper spindle: 70.98 in - Min height of spindle nose above baseplate: - Morse No 5 taper spindle: 21.06 in - Morse No 6 taper spindle: 18.62 in - Vertical adjustment of arm: 37.40 in - Drill head travel along arm: 63.54 in - Arm swivels through: ±0 deg - 180 deg - Spindle Nose diameter: - Morse No 5 taper spindle: 3.34 in - Morse No 6 taper spindle: 3.93 in - Diameter of main spindle in front bearing: 2.36 in - Taper in spindle: Morse No 5 - Stroke of main spindle: 14.96 in - Speeds - number of steps: 16 - Speed range: 11.2 to 2,000 RPM - Feeds - number of feed rates: 16 - Feed range: 0.0014 - 0.110 in/rev - Overall width of table: 9.33 ft - Approx overall length: 32 ft