The Mecalac AX 850 is a compact articulated wheel loader designed for efficient performance in diverse construction tasks. Powered by a Deutz TD 2.9 L4 low-noise, water-cooled, turbo diesel engine delivering 68 hp at 2300 rpm, it offers a robust balance of power and fuel efficiency. The machine features a hydraulic system with a single circuit central gear pump providing a flow capacity of 16.4 gal/min (61 l/min), ensuring responsive lift, tilt, and steering functions. It boasts a heaped bucket capacity of 2 cubic yards (2 m³) with a breakout force of 4200 N and a lifting force of 4300 N, complemented by a maximum tipping load of approximately 8157 lbs (3700 kg). The loader achieves a dumping angle of 45° and reaches a hinge pin height of 10.8 ft (3 m), extending reach capabilities. Dimensionally, it has a length of 17.4 ft (5 m), a width over tires of 5.8 ft (2 m), and a height of 8.2 ft (2 m) to the top of the cab, with a ground clearance of 1.4 ft (0 m). The articulated steering system allows a steering angle of 40° and a tight turning radius of 12.2 ft (4 m), enhancing maneuverability. The operating weight is approximately 11,133 lbs (5,050 kg), supported by 12.5-18 tires. Payload capacity on forks is rated at 5,180 lbs (2,350 kg) frontal. The loader operates on a 12V electrical system with a 100 Ah battery and a 95 A alternator. Fuel capacity is 23 gallons (87 liters) with hydraulic fluid capacity of 15.9 gallons (57 liters), making the AX 850 a versatile solution for compact loading tasks with a top speed of 12.5 mph (19 kph).