This CNC lathe features an 8-inch chuck size with a maximum bar capacity diameter of 2.5 inches and a maximum swing over the bed of 31.5 inches. It supports a maximum machining length of 31.9 inches and offers turning diameters of 12.5 inches maximum and 7.9 inches standard. The spindle is powered by synchronous dual motors delivering 33.3 HP (left) and 29.3 HP (right) with spindle speeds up to 5000 RPM. Both spindles utilize an A2-6 spindle nose and feature a 2.9-inch bore. The machine is equipped with 16 live tools, each with 2-inch capacity, supported by a 10 HP milling motor capable of 6000 RPM for advanced milling operations. Sub spindle travel extends to 36.2 inches, enhancing secondary operation capability. Rapid traverse rates are 1181 IPM on the X-axis and 1968 IPM on the Z-axis, with 8.3 inches X-axis travel on both upper and lower turrets and 31.9 inches Z-axis travel. Y-axis travel is 4.3 inches, complemented by C-axis indexing precision of 0.001 degrees on both spindles for complex contouring and machining tasks. The machine measures 154.7 inches in length, 145 inches in width, and 91.3 inches in height, weighing 18,000 lbs with a spindle center distance of 44.4 inches. It is controlled by the MORIC MSX-701 III CNC system, featuring a 15-inch color TFT display for user-friendly operation and programming. This configuration optimizes both turning and milling capabilities, ideal for medium-sized complex part manufacturing.