The Mustang ML68 is a robust wheel loader designed for versatility and performance on construction and material handling sites. It features a hydrostatic transmission with one forward and one reverse gear, enabling a max speed of 12.4 mph (19 kph) in both directions. Powered by a 4-cylinder BF4M2011 engine, it delivers a gross power of 79 hp (59 kW) at 2300 rpm with a torque rise of 50%, ensuring strong operational capability. The engine displacement is 190 cubic inches. The loader’s breakout force is 9,217 lbs (4,181 kg), supporting efficient digging and loading tasks. The bucket has a heaped capacity of 2.4 cubic yards (2 m³) and a struck capacity of 1.4 cubic yards (1 m³), with a width of 7.1 ft (2 m). Dump clearance at maximum raise is 8.8 ft (2.7 m), and it reaches a hinge pin height of 11.2 ft (3.4 m). Dimensions include an overall length of 18.4 ft (5.6 m) with the bucket on the ground, width over tires of 6 ft (1.8 m), height to the top of the cab at 9 ft (2.7 m), and a wheelbase of 6.8 ft (2.1 m). Ground clearance is 1.1 ft (0.3 m), facilitating maneuvering over rough terrain. The hydraulic system has a pump flow capacity of 22.2 gallons per minute (83 L/min) and operates at a relief valve setting of 3,191 psi for efficient hydraulic power. Fuel capacity is 21.1 gallons (79 L), with a hydraulic fluid capacity of 22.5 gallons (85 L). The loader weighs 12,015 lbs (5,450 kg), with a static tipping weight of 8,730 lbs (3,960 kg). It uses 16/70-20 tires, has a rear axle oscillation of 40°, and a turning radius of 13.1 ft (4 m), allowing for excellent stability and tight turning capability.