The New Holland F170 Motor Grader is a robust and versatile machine designed for demanding grading applications. It features a 13-foot moldboard with a 26.5-inch height and 0.9-inch thickness, capable of a maximum cut depth of 28.1 inches and delivering a blade down pressure of 20,626.5 lbs. The circle system provides a 69.1-inch diameter, 360-degree rotation, and a front blade tip angle of 40 degrees, with a rear angle of 5 degrees, allowing for precise grading and maneuverability. The grader’s overall length is 28 feet, with a height to the top of the Isomount cab of 11 feet and a width over tires of 8.3 feet. It is powered by a turbocharged 6 CTAA 8.3 Tier 2 engine, displacing 506.5 cubic inches and producing 170 lb-ft of torque at 2200 rpm. The Direct Drive PowerShift transmission offers 8 forward and 4 reverse gears, with a maximum forward speed of 26.8 mph and a reverse speed of 17.8 mph. The hydraulic system utilizes a full load-sensing pump with a flow rate of 48.4 gpm and a relief valve pressure of 2596.2 psi. The machine’s total operating weight is 32,077.3 lbs, with a fuel capacity of 89.9 gallons and a hydraulic system capacity of 25.1 gallons. The F170 also features a 24-volt electrical system, 70-amp alternator, and a 24-foot turning radius, ensuring efficient operation and reliability in various conditions.