The New Holland F200 motor grader is a heavy-duty machine designed for precision grading and earthmoving tasks. It features a **turbocharged 6-cylinder 6 CTAA 8.3 Tier 2 engine** with a displacement of 506.5 cu in, delivering up to 200 lb-ft of net torque at 2200 rpm through a direct drive PowerShift transmission with 8 forward and 4 reverse gears, achieving a maximum forward speed of 26.8 mph. The grader’s **moldboard measures 14 ft wide, 26.5 in high, and 0.9 in thick**, capable of exerting a blade down pressure of 23,997 lbs and offering a maximum cutting depth of 28.1 in. The moldboard supports a **360-degree circle rotation** with blade tip angles of 40° front and 5° rear, and side-shift capabilities of 21 in left and 27.1 in right, providing versatility on challenging grading jobs. The machine’s **dimensions include an 8.7 ft width over tires, 28.1 ft overall length, 20.5 ft wheelbase, and a height of 11 ft to the isomount cab**. It supports a maximum operational weight of approximately 38,030 lbs split between front and rear axles. The hydraulic system is a full hydraulic load-sensing type with 49.2 gpm pump flow and 2596 psi relief pressure, ensuring efficient control of blade and steering functions. The front axle allows 19° total oscillation and 18° wheel lean, while the steering articulation angle is 25°, enabling a turning radius of 24 ft. Operating on a 24-volt electrical system, it carries a 90.1-gallon fuel tank and a 70-amp alternator, supporting durability and long operational cycles. Tire size is 14.00 x 24 (10PR), suited for heavy workloads in construction and road maintenance applications.