The New Holland W130B wheel loader features a powerful FPT 667TA/EDB 6-cylinder engine with a displacement of 409 cu in, delivering a gross power of 149 hp (138 hp net) at 2000 rpm and maximum torque at 1000 rpm. Designed for high productivity, it has a rated bucket capacity of 2.56 cubic yards (approximately 2 m³) with an 8.6 ft (2 m) wide bucket capable of handling heavy loads efficiently. Its dump clearance reaches 9.5 ft (3 m) at maximum raise, with a hinge pin height of 12.6 ft (4 m) and a reach of 3.1 ft (1 m) at max lift and dump, providing excellent load reach and dump height for diverse jobsite requirements. The machine's dimensions include a length of 23.8 ft (7 m) with the bucket on the ground, a height to the top of the cab of 11.2 ft (3 m), a wheelbase of 9.6 ft (3 m), and width over tires of 8.3 ft (2 m). It has a ground clearance of 1.3 ft (0.4 m) suitable for various terrain types. The wheel loader supports a maximum forward speed of 24 mph (39 kph) and a reverse speed of 15.6 mph (24 kph) through a transmission with 4 forward and 3 reverse gears. Its hydraulic system includes dump, lower, and raise times of 1.3, 4.6, and 6.3 seconds respectively, optimizing cycle times. The operating weight is approximately 27,406 lbs (12,431 kg), with a fuel capacity of 65 gallons (246 liters) and a hydraulic fluid capacity of 39 gallons (148 liters). Other fluid capacities include engine oil at 3.5 gallons, transmission fluid at 5 gallons, and axle fluids at 5.9 gallons each for front and rear. The loader rides on 17.5x25 L2/L3 tires and features a turning radius of 18.9 ft (5.8 m). The alternator supplies 70 amps at 24 V operating voltage, supporting electrical system demands. This model is noted for its robustness, ergonomic cab design ensuring safety and operator comfort, and Tier 3 emissions certification, making it suitable for demanding construction and material handling tasks.