The SIDDHAPURA MT SEW / S-25 Upright Drill Press is a robust industrial pillar drilling machine designed for precision and durability. It features a **swing of 23.5 inches (596.9 mm)** and a **maximum drilling capacity of 0.98 inches (25 mm) in mild steel**, suitable for various metalworking applications. The drill is powered by a **0.94 HP motor** running at a variable speed range primarily around **73 RPM**, with variants supporting speeds up to **1800 RPM**, offering versatility for different materials and drilling requirements. Its **column diameter measures 3.45 inches (87.6 mm)**, providing stability during operation. The spindle's center to table distance is approximately **10 inches (255 mm)**, while the maximum spindle to table distance extends up to **25.6 inches (650 mm)**, accommodating larger workpieces. The table size is a substantial **13.6 x 13.6 inches (345 x 345 mm)**, allowing ample support. The machine includes a **MT-3 taper spindle bore**, with the main spindle and quill constructed from **EN steel** and both components hardened and ground to ensure longevity and precision. Key structural parts are crafted from **close graded castings** for added strength. The overall dimensions are **60.2 inches height, 19.7 inches width, and 37.4 inches depth**, making it relatively compact for workshop use. This configuration supports spindle travel of around 185-215 mm depending on the model, and the drill press typically functions with an 8-speed setup to cover a breadth of operational needs efficiently.