Engine
Series 60
Engine Power (hp)
400
Drive Configuration
6x6
Type
Dump
Payload Capacity (lbs)
74956
Overall Lenght (ft)
35.8
Overall Width (ft)
10.5
Overall Height (ft)
12.8
Weight (lbs)
64547
Technical Specifications
- Dump Ground Clearance: 2.8 ft
- Dump Height: 22.7 ft
- Ground Clearance: 1.8 ft
- Overall Height: 12.8 ft
- Overall Length: 35.8 ft
- Overall Width: 10.5 ft
- Wheelbase: 17.4 ft
- Drive Configuration: 6x6
- Dump Capacity (Heaped): 27.5 cu yd
- Dump Capacity (Struck): 20.3 cu yd
- Dump Angle: 66 degrees
- Lower Time: 8 seconds
- Raise Time: 12.5 seconds
- Rated Payload: 74,956 lbs
- Engine Aspiration: Turbocharged
- Engine Displacement: 855 cu in
- Engine Model: Series 60
- Gross Power: 400 hp
- Engine Make: Detroit Diesel
- Max Torque: 1,445 lbs ft
- Net Power: 388 hp
- Number of Cylinders: 6
- Power Measured @: 2000 rpm
- Torque Measured @: 1200 rpm
- Alternator Supplied Amperage: 100 amps
- Cooling System Fluid Capacity: 17.7 gal
- Engine Oil Capacity: 8.5 gal
- Fuel Capacity: 118.9 gal
- Hydraulic System Fluid Capacity: 87.2 gal
- Operating Voltage: 24 volts
- Tire Size: 26.5R25
- Transmission Fluid Capacity: 16.2 gal
- Max Speed: 33.5 mph
- Number of Forward Gears: 6
- Number of Reverse Gears: 1
- Transmission Type: Allison HD4560 fully automatic
- Center Axle - Empty: 15,707 lbs
- Center Axle - Loaded: 50,705 lbs
- Front Axle - Empty: 33,258 lbs
- Front Axle - Loaded: 38,094 lbs
- Operating Weight: 139,509 lbs
- Rear Axle - Empty: 15,582 lbs
- Rear Axle - Loaded: 50,705 lbs
- Total Empty: 64,547 lbs
- Total Loaded: 139,506 lbs
Data may contain nonconformities, defects, errors, or omissions and should be verified before use. All data that Aucto provides is "as is" without any guarantees of any kind. If you see data that looks to be incorrect or needs to be updated, please let us know by emailing us at support@aucto.com with the product name, page URL, the incorrect data and updated values (if available). We will try our best to update inaccurate data as quickly as possible.
If this data is incorrect, please let us know by
clicking here
.
