The Volvo G710 is a versatile motor grader featuring a turbocharged 6-cylinder Volvo 6B5.9 engine producing 140 horsepower at 2,200 rpm and 440 lb-ft of torque at 1,600 rpm. With a displacement of 360.1 cubic inches, this machine delivers consistent power for demanding grading operations. The G710 measures 27.8 feet in overall length with an 8.2-foot width over tires and a 20-foot wheelbase, providing excellent stability and maneuverability on job sites. Its moldboard spans 12.1 feet wide with a maximum cutting depth of 32.6 inches and blade pull capability of 19,109 pounds at maximum weight, enabling efficient material handling and surface preparation. The load-sensing hydraulic system supplies 50.5 gallons per minute at 2,500 psi relief pressure, ensuring responsive blade control and smooth operation. Operating at a total weight of 30,631 pounds with 9,400.6 pounds on the front axle and 21,230.6 pounds on the rear, the G710 achieves forward speeds up to 24.8 mph and reverse speeds to 17.8 mph through its Volvo 8400 transmission featuring eight forward and four reverse gears. The articulation steering system provides a 22-degree angle with a 25.5-foot turning radius, while the 66.3-inch diameter circle with full 360-degree rotation enables precise positioning and grading accuracy for road construction, maintenance, and land development applications.