The WELE HMC630 is a three-axis CNC horizontal machining center designed for precision metalworking operations. With a horizontally positioned spindle and robust cast iron construction, it delivers exceptional rigidity and stability for heavy-duty cutting applications. The machine features 41 inches (1050mm) of X-axis travel, 35 inches (approximately 890mm) of Y-axis travel, and 34 inches (approximately 864mm) of Z-axis travel, accommodating workpieces up to 1200mm in diameter. The HMC630 is equipped with a BT50 spindle taper operating at maximum speeds up to 6000 rpm, enabling efficient material removal across various applications including milling, boring, drilling, and tapping. Its advanced CNC control system supports full closed-loop operation with positioning accuracy of ±0.003mm on X, Y, and Z axes, ensuring consistent precision. The machine features rapid traverse rates reaching 24-30 m/min and cutting feed speeds up to 10,000 mm/min. The HMC630 incorporates an automatic tool changer with 24-30 position arm-type magazine, reducing tool change time to approximately 3 seconds for improved productivity. A spindle oil cooling system minimizes heat distortion during extended operations, maintaining machining accuracy. The work table accommodates maximum loads of 950-1200kg depending on configuration. Optional dual-pallet systems enable automatic table exchange, enhancing production efficiency for continuous manufacturing cycles.