FANUC ROBOCUT A-C400IA WIRE EDM MACHINE

The FANUC ROBOCUT A-C400IA Wire EDM Machine delivers high-precision electrical discharge machining with robust performance and advanced control. Featuring X, Y, Z, U, V, A, and B axes, it offers travel of 14.6 inches (X), 10.6 inches (Y), and 10.2 inches (Z), with UV axes travel of ±2.362 inches. Rapid traverse ranges from 1 to 50 inches per minute, supporting efficient machining cycles. Positioning accuracy is ±0.0001 inches, with repeatability of ±0.000050 inches, enabled by direct-coupled AC servo motors and ball screws. The machine achieves a maximum cutting speed of 31–33.5 square inches per hour using 0.012-inch brass or coated wire on 2.4-inch thick tool steel. Internal worktank dimensions are 30.5 x 23.6 x 9.8 inches, with a maximum submerged cutting depth of 9.84 inches and workpiece weight capacity of 1,100 pounds. The wire feed system supports diameters from 0.004 to 0.012 inches, with a wire feed rate up to 590 inches per minute and tension from 200 to 2,500 grams. Maximum wire spool weight is 35 pounds. Dielectric fluid is deionized water, with a 145-gallon tank and 3-micron filtration. Power requirements are 13 KVA (200/220 V, 3-phase, 60 Hz). The machine occupies 92 x 105 inches of floor space and weighs 4,000 pounds. Control resolution is 0.00000004 inches, with linear and circular interpolation, and a transistor-driven pulse generator offering flexible pulse mode and programmable flushing settings.