Technical Description
The Hyster H135FT Diesel forklift is a heavy-duty internal combustion, sit-down counterbalanced forklift designed for demanding industrial applications. It features a Kubota 3.8L turbo diesel engine with 4 cylinders, delivering 105 hp at 2200 rpm and a torque of 275 lbs-ft at 1600 rpm, ensuring robust power and efficient performance. The forklift has a maximum load capacity of 13,227.8 lbs with a 24.1-inch load center, suitable for lifting heavy materials safely. Its mast provides a maximum fork height of 17.8 feet and lift speeds of 96 feet per minute, with a lower speed of 104 feet per minute, allowing for efficient material handling. The mast also offers forward and rear tipping angles of 5 and 10 degrees respectively to aid in load control.
Dimensionally, the H135FT measures 11.9 feet in length to the fork face, 6.9 feet in overall width, and 8.4 feet to the top of the overhead guard. It offers a ground clearance of 10 inches and a wheelbase of 7.4 feet. The forklift's turning radius is 10.9 feet, with front and rear track widths of 6.1 and 5.1 feet respectively, providing good maneuverability in tight spaces. It has a gradeability of 37%, enabling operation on inclines.
The forklift runs on pneumatic tires with a total operating weight of 19,771.1 lbs. Fuel capacity is 19.7 gallons with an 18.9-gallon hydraulic tank, operating under hydraulic system relief valve pressure of 2250 psi. Maximum travel speed reaches 12.7 mph. Front axle load is 9,512 lbs while rear axle load is 10,258 lbs. This model combines strength, reliability, advanced cooling, and industrial-grade electronics, optimized ergonomics, and customizable performance modes to deliver efficiency in rigorous heavy-lift operations. It is suitable for outdoor, heavy-duty industrial environments, offering a balance of power, control, and fuel economy.
