HYSTER H135FT DM GAS SIT-DOWN FORKLIFT

The Hyster H135FT DM Gas forklift is a heavy-duty internal combustion sit-down counterbalance forklift designed for demanding industrial applications. It features a powerful GM 4.3L six-cylinder gasoline engine with a displacement of 262 cubic inches, delivering 96.6 horsepower and 210 lb-ft of torque at 2400 rpm. The forklift has an operating weight of approximately 19,914 lbs and pneumatic tires with four front and two rear wheels, providing robust traction and stability on rough terrain. Its maximum travel speed reaches 16.2 mph. Dimensionally, the H135FT has a ground clearance of 10 inches, an overall width of 6.9 feet, and a wheelbase of 7.4 feet. The height to the top of the overhead guard is 8.4 feet, while the mast lowered height is 12.3 feet. It has a turning radius of 10.9 feet and a length to fork face of 11.8 feet. The maximum fork height is 17.8 feet, supporting a load capacity of up to 13,503 lbs at a 24.1-inch load center. The mast offers a lift speed of 104.3 feet per minute and a lower speed of 84.6 feet per minute, with mast tilt angles of 5 degrees forward and 10 degrees backward. The maximum fork spread is 73.9 inches. The forklift's transmission is often an electronic powershift type, which includes features such as hydraulic inching and soft shift for smooth operation. The design emphasizes durability, low noise and vibration, operator ergonomics, and customizable performance modes to balance productivity and fuel economy based on operational needs.