HYSTER H300HD2S SIT-DOWN FORKLIFTS

Technical Description

The Hyster H300HD2S is a heavy-duty forklift engineered for demanding industrial and construction environments. Powered by a Cummins QSB 6.7L Tier 3 diesel engine, it delivers 155 horsepower at 2300 rpm and 440 lb-ft of torque at 1500 rpm, ensuring robust performance and reliability. The six-cylinder engine is paired with a ZF/WG161 powershift transmission, offering three forward and three reverse speeds for smooth operation. The forklift features a 120-amp alternator, a 102 Ah battery, and a 24-volt electrical system. With a rated load capacity of 30,000 lbs at a 24.1-inch load center, the H300HD2S is equipped with a two-stage non-free lift mast, providing a lift speed of 71 ft/min and a lower speed of 98 ft/min. Mast tilt is 15 degrees forward and 12 degrees rearward for enhanced load control. The forklift has a length to fork face of 16.4 ft, an overall width of 8.4 ft, and an overall height of 11.8 ft with the mast lowered. The wheelbase measures 10.9 ft, and the turning radius is 15.1 ft, ensuring maneuverability in tight spaces. Pneumatic tires (12.00-20 20PR) are fitted, with four front and two rear wheels. Braking is handled by oil-immersed (wet) disc service brakes and a spring-applied, dry disc parking brake on the drive axle. The H300HD2S has a maximum speed of 17 mph, a fuel capacity of 42 gallons, and an operating weight of 39,353 lbs. Hydraulic and oil system fluid capacities are 37 gallons and 26.4 gallons, respectively.