2011-2023 JOHN DEERE 244H WHEEL LOADER

The John Deere 244H is a compact wheel loader featuring a natural aspiration 4-cylinder 4TNE98 engine with 58 hp gross power (55 hp net) at 2200 rpm and a torque of 166 lb-ft at 1300 rpm. It delivers a breakout force of 10,143 lbs, paired with a 1 cubic yard heaped bucket capacity and a bucket width of 6.6 ft, providing efficient material handling. The loader’s hydraulic system uses a gear pump with a flow capacity of 21.2 gpm and operates at a relief valve setting of 2990 psi. Key operational times include a dump time of 0.8 seconds, raise time of 4.3 seconds, and lower time of 3.8 seconds. Dimensionally, the 244H measures 16.3 ft in length with the bucket on the ground, 6.4 ft in width over tires, and 9.9 ft in cab height. The wheelbase is 7.3 ft, with a ground clearance of approximately 1.1 ft. Dump clearance at maximum raise is 8.4 ft, and reach at max lift and dump is 2.8 ft. It has a turning radius of 12.5 ft and an operating weight of approximately 11,370 lbs. The machine uses a 2-speed hydrostatic transmission with maximum travel speeds of 20.1 mph both forward and reverse. The 244H runs on a 24V electrical system with a 35A alternator and is equipped with 17.5/65-20 tires. Fluid capacities include 18.5 gallons fuel, 19.3 gallons hydraulic, and 3.1 gallons engine oil, supporting sustained operation under load. Rear axle oscillation is 22 degrees, enhancing maneuverability on uneven terrain. This combination of power, hydraulic efficiency, and compact dimensions makes the John Deere 244H suitable for versatile construction and material handling tasks.