NEW HOLLAND MH5.6 CRAWLER EXCAVATOR

The New Holland MH5.6 is a versatile wheel-type excavator engineered for demanding jobsite applications, featuring a robust six-cylinder CNH diesel engine producing 152 horsepower (113 kW) with turbocharging and charge air cooling. This 45,040-pound machine delivers exceptional digging capabilities with maximum depths reaching up to 20.2 feet depending on boom configuration, complemented by a maximum reach along ground of 31.8 feet and cutting heights up to 34.9 feet. The excavator accommodates three boom/stick configurations, allowing operators to select the optimal setup for specific project requirements, with bucket capacities ranging from 0.7 to 1.3 cubic yards. Powered by a CNH F4BE0684A engine with 360.1 cubic inches displacement, the machine operates on a 24-volt electrical system with 70-amp alternator capacity. The hydraulic system features a pump flow capacity of 118.9 gallons per minute with a relief valve pressure of 5,003.9 psi, supported by a 37-gallon fluid reservoir. Dimensionally, the unit measures 10.1 feet in height with an 8.7-foot wheelbase, 8.4-inch overall width, and 6.8-foot tail swing radius, providing excellent maneuverability on confined jobsites. The 4x4 hydrostatic drive system achieves maximum travel speeds of 12.5 mph with a drawbar pull of 25,853 pounds. With an operating weight of approximately 20,430 kilograms and equipped with hydraulic outriggers for stabilization, this machine delivers reliable performance across construction, demolition, and material handling applications.