1967 MONARCH 612 ENGINE LATHE 19'' X 96'', 28'' SWING, 12-1,500 RPM, 440V

THIS IS A 1967 MONARCH 612 19'' X 96'' ENGINE LATHE MANUFACTURED BY MONARCH, MODEL 612, AND BUILT IN FEBRUARY 1967. IT OPERATES ON 440V 3PH 60HZ POWER. KEY SPECIFICATIONS INCLUDE A 28'' SWING AND A 96'' CENTER SPAN. THE SPINDLE FEATURES A THROUGH-HOLE OF APPROXIMATELY 2.06'' AND A D1-6 CAMLOCK NOSE, WITH SPEEDS RANGING FROM 12 TO 1,500 RPM. THE MACHINE OFFERS A THREADING RANGE OF 2–120 TPI AND FEED RATES FROM 0.001–0.068 IN/REV. IT IS EQUIPPED WITH A 19'' 3-JAW CHUCK. THE MACHINE WEIGHS 13,775 LBS AND HAS DIMENSIONS OF 188'' X 56'' X 60''.