2019 Jcb 512-56 Telehandler, 12K lbs Cap, 56ft Max Lift, 42ft Max Reach

The JCB 512-56 is a high-capacity telescopic handler designed for demanding construction and industrial applications. It is powered by a JCB ECOMAX engine, with options for 74 hp (55 kW) or 109 hp (81 kW), providing high torque at low engine speeds. The machine features a maximum lift capacity of 12,000 lbs and a maximum lift height of 56 feet. Its reach performance includes a maximum forward reach of 42 feet and a reach of 8 feet 2 inches at maximum lift height. The 512-56 utilizes a 4-speed powershift transmission with permanent four-wheel drive and three steer modes: front-wheel, all-wheel, and crab steer. Structurally, the telehandler is built on a one-piece fully welded chassis with a tough inverted U-shaped boom pressing. Standard features include a 12V electric system with a 130 Ah battery, servo-assisted hydraulic multi-disc brakes, and a 3.5-inch color TFT dash display. The hydraulic system operates at a pressure of 3,770 PSI with a pump flow of 29 gal/min. For stability and precision, the unit is equipped with wide-set stabilizers, frame sway control of 10 degrees, and an automatic rear axle stabilization system. Dimensions include an overall height of 8 feet 10 inches, an overall width of 8 feet 1 inch, and an unladen weight of approximately 30,635 lbs. The operator environment is designed with a single-lever proportional joystick and extensive glazing for all-around visibility.