22"/31" X 100" SHARP 22100B GAP BED LATHE W/NEWALL DRO - 21.97" SWING, 4.5" BORE

THE SHARP 22100B GAP BED LATHE, MANUFACTURED IN 2013, IS A HEAVY-DUTY ENGINE LATHE FEATURING A NEWALL DP700 DIGITAL READOUT (DRO), A 4.5-INCH SPINDLE BORE, AND A 100-INCH DISTANCE BETWEEN CENTERS FOR MACHINING LARGE WORKPIECES. THE MACHINE PROVIDES A 22-INCH SWING OVER BED, 13.2-INCH SWING OVER CROSS SLIDE, AND 31-INCH SWING OVER GAP. THE HEADSTOCK IS EQUIPPED WITH A D1-11 CAMLOCK SPINDLE NOSE, MT #5 TAPER, AND A SPINDLE SPEED RANGE OF 10 TO 1,000 RPM IN 12 SPEED STEPS, DRIVEN BY A 15 HP SPINDLE MOTOR. THE CARRIAGE OFFERS 11.8 INCHES OF CROSS SLIDE TRAVEL AND 6.2 INCHES OF COMPOUND REST TRAVEL, WITH LONGITUDINAL FEED RATES FROM 0.0022 TO 0.032 IN/REV AND CROSS FEED RATES FROM 0.00026 TO 0.035 IN/REV. THREADING CAPABILITIES INCLUDE 44 INCH THREADS FROM 2 TO 56 TPI, 24 METRIC THREADS FROM 0.5 TO 14 MM, AND 36 DIAMETRAL PITCH THREADS FROM 4 TO 56. THE TAILSTOCK FEATURES A 3-INCH QUILL DIAMETER, 6.5-INCH QUILL TRAVEL, AND AN MT #5 QUILL TAPER. ADDITIONAL FEATURES INCLUDE A 16-INCH BTC 3-JAW CHUCK, 4-WAY TOOLPOST, STEADY REST WITH A 4 TO 11.5-INCH CAPACITY, DIRECT SELECTION FOR INCH AND METRIC THREADING, QUICK-CHANGE GEARBOX, ONE-PIECE MEEHANITE CAST BED, SPLASH GUARD WITH 16-INCH CHUCK GUARD, COOLANT SYSTEM, HALOGEN WORK LIGHT, AND A 4-WAY CARRIAGE STOP. THE LATHE HAS A 15.75-INCH BED WIDTH, OPERATES ON A 230/460V, 3-PHASE POWER SUPPLY, MEASURES APPROXIMATELY 157 INCHES LONG BY 41 INCHES DEEP BY 50 INCHES HIGH, AND WEIGHS APPROXIMATELY 6,930 LBS.