CINCINNATI HYDRASHIFT ENGINE LATHE 10X36 3HP 35-1200 RPM

THE CINCINNATI HYDRASHIFT ENGINE LATHE IS SPECIFIED AS A 10" X 36" TOOLROOM PRECISION MODEL. IT FEATURES A 10-INCH SWING AND A 7-INCH SWING OVER THE CROSS SLIDE, WITH A 36-INCH DISTANCE BETWEEN CENTERS. THE SPINDLE IS POWERED BY A 3 HP MAIN DRIVE MOTOR OPERATING ON 230V/460V 3 PHASE ELECTRICITY. THE LATHE PROVIDES TWELVE SPINDLE SPEEDS RANGING FROM 35 RPM TO A MAXIMUM OF 1200 RPM. INCLUDED TOOLING AND ACCESSORIES COMPRISE A 6-INCH HARDINGE 3 JAW CHUCK, A HARDINGE COLLET CHUCK WITH 30 COLLETS, A 4 JAW CHUCK, AND AN ALORIS QC TOOLPOST. THE MACHINE IS FURTHER EQUIPPED WITH A TAPER ATTACHMENT, A MICRO CARRIAGE STOP, TWO STEADY RESTS, A SPACER PLATE, A FACE PLATE, A CHIP PAN, AND A COOLANT PUMP.