Harig Roto Spindle E-20 - 175-100

Used Harig E-20 Roto Spindle, P/N 175-100, enhances EDM productivity. It features 20mm tooling, 10-260 RPM variable speed, and compatibility with vertical ram EDMs. This lightweight spindle boosts cutting rates up to 50% for efficient and precise operations. Harig's economical EDM spindle mounts to conventional EDM machines to increase productivity. The Roto-Spindle spins your electrode to improve accuracy, decrease electrode wear, and increase hole-making speed up to 50%. The E-20 Roto-Spindle (P/N 175-100) holds 20mm tooling. Motor has built-in variable speed control for ideal operation between 10-260 RPM. When looking to improve burning times and accuracy on conventional EDM machines, the Roto-Spindle will do the job economically and efficiently. Reliability backed by Harig's trademark service. Features: - E-20 Roto-Spindle uses 20mm tooling - Compatible with the Harig Flush Chucks used for holding smaller electrodes - Adapts to all vertical ram conventional EDM machines - Increases cutting rate up to 50%. Improves finish and electrode wear - Allows excellent flushing for efficient operation - Improves concentricity and allows operator to work with "tenths" - Variable speed motor operates on 110V from 10-260 RPM - Spindle housing is insulated from motor - Current through spindle 10 amp max - Compact, lightweight, and easy to use - Full repair service and replacement parts available Specifications: Spindle run-out: 0.0001" Motor: Baldor 1/15 horsepower 110V AC Variable speed: 10-260 rpm Weight: 9 lbs Flushport: 1/8 -27 NPT Harig's economical EDM spindle mounts to conventional EDM machines to increase productivity. The Roto-Spindle spins your electrode to improve accuracy, decrease electrode wear, and increase hole-making speed up to 50%. The E-20 Roto-Spindle (P/N 175-100) holds 20mm tooling. Motor has built-in variable speed control for ideal operation between 10-260 RPM. When looking to improve burning times and accuracy on conventional EDM machines, the Roto-Spindle will do the job economically and efficiently. Reliability backed by Harig's trademark service. Features: - E-20 Roto-Spindle uses 20mm tooling - Compatible with the Harig Flush Chucks used for holding smaller electrodes - Adapts to all vertical ram conventional EDM machines - Increases cutting rate up to 50%. Improves finish and electrode wear - Allows excellent flushing for efficient operation - Improves concentricity and allows operator to work with "tenths" - Variable speed motor operates on 110V from 10-260 RPM - Spindle housing is insulated from motor - Current through spindle 10 amp max - Compact, lightweight, and easy to use - Full repair service and replacement parts available Specifications: Spindle run-out: 0.0001" Motor: Baldor 1/15 horsepower 110V AC Variable speed: 10-260 rpm Weight: 9 lbs Flushport: 1/8 -27 NPT