Mag-Mate DLR0600 Permanent Lift Magnet, 600 lbs Capacity, Remote Operated 20 lbs

THE MAG-MATE DYNAMICLIFT DLR0600 IS A REMOTE-OPERATED, PERMANENT RARE EARTH LIFT MAGNET DESIGNED FOR CONTROLLED MATERIAL HANDLING OF FERROUS ITEMS WITHOUT REQUIRING AIR OR ELECTRICITY. UTILIZING MAGSWITCH TECHNOLOGY, THE UNIT FEATURES A LOCKING ON/OFF MECHANISM THAT CAN BE ACTUATED VIA A REMOTE CONTROL UP TO 10 METERS (32.8 FEET) AWAY, OR THROUGH A SECONDARY MANUAL RELEASE MECHANISM IN CASE OF BATTERY FAILURE. IT IS POWERED BY TWO 12-VOLT RECHARGEABLE LITHIUM-ION BATTERIES THAT PROVIDE OVER 200 CYCLES PER CHARGE AND INCLUDES INTEGRATED INDICATOR LIGHTS FOR OPERATIONAL STATE AND BATTERY STRENGTH. FOR OPERATIONAL SAFETY, IT INCORPORATES A LOAD SENSOR AND A THREE-BUTTON POWER-OFF SEQUENCE TO PREVENT ACCIDENTAL RELEASE WHILE UNDER LOAD. THE LIFTING MAGNET DELIVERS A WORKING LOAD LIMIT CAPACITY OF 600 POUNDS ON FLAT ITEMS WITH A MINIMUM THICKNESS OF 3 INCHES, OPERATING WITH A 3:1 DESIGN FACTOR THAT CONFORMS TO ASME B30.20 STANDARDS. CONSTRUCTED WITH TWO POLES AND A PLATED FINISH COATING, THE INTERNAL RELEASE MECHANISM ENSURES THAT COMPONENTS ARE ENGAGED AND RELEASED CLEANLY WITHOUT CONTACTING OR DAMAGING THE MATERIAL'S SURFACE. PHYSICALLY, THE BLACK-COLORED UNIT MEASURES 8.5 INCHES IN LENGTH, 4 INCHES IN WIDTH, AND 12.5 INCHES IN OVERALL HEIGHT, WITH A TOTAL WEIGHT OF 20 POUNDS. IT FEATURES A 3.5-INCH HANDLE AND A TOP LIFTING BAIL MEASURING 2.5 INCHES HIGH BY 3.25 INCHES WIDE BY 0.375 INCHES THICK TO FACILITATE CRANE USAGE. THE DEVICE IS HEAT-RESISTANT UP TO A MAXIMUM OPERATING TEMPERATURE OF 180 DEGREES FAHRENHEIT (82 DEGREES CELSIUS).