MITSUBISHI FGC40K FORKLIFT, 8000LBS CAPACITY, LP GAS, 4.3L V6, 183IN MAX LIFT, CUSHION TIRES

THE MITSUBISHI FGC40K IS AN INTERNAL COMBUSTION, CUSHION TIRE FORKLIFT DESIGNED FOR HIGH-CAPACITY INDOOR MATERIAL HANDLING. IT FEATURES A NOMINAL LOAD CAPACITY OF 8,000 LBS (APPROXIMATELY 4 TONS) AT A 24-INCH (500 MM) LOAD CENTER. THE MACHINE IS TYPICALLY POWERED BY A 4.3L V6 ENGINE, SUCH AS THE PSI 4X OR A GM-SOURCED UNIT, PRODUCING APPROXIMATELY 92.5 TO 93 HORSEPOWER AND 220 LB-FT OF TORQUE. IT UTILIZES LP GAS (PROPANE) AND IS EQUIPPED WITH A POWERSHIFT TRANSMISSION, OFTEN FEATURING AN INCHING VALVE FOR PRECISE POSITIONING. THE CHASSIS HAS AN OVERALL WIDTH OF APPROXIMATELY 46.5 INCHES AND A LENGTH TO THE FORK FACE OF 100.4 INCHES, WITH AN OPERATING WEIGHT OF ROUGHLY 12,280 LBS. KEY DIMENSIONS INCLUDE A TURNING RADIUS OF APPROXIMATELY 7.5 TO 8 FEET AND A WHEELBASE OF 62 INCHES. MAST OPTIONS INCLUDE TRIPLE-STAGE UPRIGHTS WITH MAXIMUM FORK HEIGHTS REACHING UP TO 183 INCHES, DEPENDING ON THE CONFIGURATION. THE HYDRAULIC SYSTEM SUPPORTS LIFT SPEEDS OF APPROXIMATELY 112 FT/MIN AND LOWERING SPEEDS OF 98 FT/MIN. STANDARD FEATURES INCLUDE AN INTEGRATED PRESENCE SYSTEM (IPS) FOR OPERATOR SAFETY, HYDROSTATIC POWER STEERING, AND A PREMIUM LCD/LED DISPLAY FOR MONITORING VITAL FUNCTIONS. THE UNIT RUNS ON SOLID RUBBER CUSHION TIRES, SUPPORTING A MAXIMUM TRAVEL SPEED OF APPROXIMATELY 12 MPH. MAINTENANCE IS FACILITATED BY 300 TO 500-HOUR SERVICE INTERVALS AND TOOL-FREE ENGINE COMPARTMENT ACCESS.