Sunnen GGN-150 Mandrel Driver, ID 0.744"-3.875", OAL 12", RPM 275-450

Sunnen Mandrel Driver GGN-150 for sale. Used tooling accessory ideal for large bores. Includes eccentric sleeve, adjustable cutting pressure, and quick-release lever. Compatible with CR-, PL-, and ML-Series hones. Ideal for hole sizing and finishing. Sunnen Mandrel Driver - GGN-150 USED Brand: Sunnen Part Number: GGN-150 Mandrel Driver OAL: 12" (entire piece) - 5-3/4" (not counting black hinge) ID Range: 0.744″ – 3.875″ 19-98mm Required Drill Motor: Any 1/2″ or larger drill Recommended RPM: 275-450 RPM Honing Application: For large bores 0.75″ and up where the bore length is at least three times the diameter Adjustment: Graduated adjustment knob for advancing and retracting honing stones Stone Control: Quick-release lever for retracting stones Included: Comes with an eccentric sleeve (LN-0116A) Pressure: Spring-loaded adjustable cutting pressure Other Notes: Compatible with CR-, PL-, and ML-Series hones Function: Used with portable Hones Used For: Sizing and Finishing Holes. Sunnen Mandrel Driver - GGN-150 USED Brand: Sunnen Part Number: GGN-150 Mandrel Driver OAL: 12" (entire piece) - 5-3/4" (not counting black hinge) ID Range: 0.744″ – 3.875″ 19-98mm Required Drill Motor: Any 1/2″ or larger drill Recommended RPM: 275-450 RPM Honing Application: For large bores 0.75″ and up where the bore length is at least three times the diameter Adjustment: Graduated adjustment knob for advancing and retracting honing stones Stone Control: Quick-release lever for retracting stones Included: Comes with an eccentric sleeve (LN-0116A) Pressure: Spring-loaded adjustable cutting pressure Other Notes: Compatible with CR-, PL-, and ML-Series hones Function: Used with portable Hones Used For: Sizing and Finishing Holes.