The Champion 750A Motor Grader is a robust earthmoving machine designed for precision grading and road maintenance. It features a 14-foot moldboard with a 31-inch height and 1-inch thickness, capable of a 2.1-foot cutting depth and 1.6-foot ground clearance. The blade offers a front tip angle of 46 degrees and a rear tip angle of 13 degrees, with a 66.7-inch circle diameter allowing full 360-degree rotation and 17.6 inches of left shift. The grader’s overall dimensions are 28.6 feet in length, 9.2 feet in width, and 11.5 feet in height with the cab, with a 20.5-foot wheelbase and 91-inch tread width. Powered by a turbocharged 6-cylinder LT-10-C engine, it delivers 215 gross horsepower and 200 net horsepower at 2100 rpm, with a displacement of 610.3 cubic inches and torque measured at 1300 rpm. The hydraulic system provides 48.2 gallons per minute pump flow and 2500 psi relief valve pressure. The front axle offers 2.3 feet of ground clearance, 16 degrees of oscillation, and 18 degrees of wheel lean. The powershift transmission features 8 forward and 4 reverse gears, with a maximum forward speed of 24.2 mph and reverse speed of 17.3 mph. Standard operating weight is 38,200 pounds, with a 22-degree articulation angle and a 25.5-foot turning radius. Fluid capacities include 10.8 gallons for cooling, 100 gallons for fuel, 23.8 gallons for hydraulics, 10.4 gallons for oil, 9 gallons for rear differential/final drive, 26.5 gallons per tandem case, and 10.3 gallons for transmission. Tires are sized 16.00 x 24, G-2.