The Mitsubishi MG230-E motor grader is a robust heavy equipment machine designed for precision grading and earthmoving tasks. It features a 6-cylinder Mitsubishi 6D34-TE1 diesel engine with a displacement of 357.7 cubic inches, delivering a maximum power output of 115 hp at 2500 rpm. The grader's moldboard measures 10.2 feet in width, 24.1 inches in height, and 0.8 inches in thickness, capable of 360-degree rotation with front and rear blade tip angles of 40 and 5 degrees respectively. The moldboard can lift up to 17 inches above ground and shift left 65 inches, right 66.2 inches for versatile terrain adaptation. Dimensionally, the MG230-E spans 24.1 feet in overall length with a 17.4-foot wheelbase, 7.1 feet width over tires, and a cab height of 10 feet. It has an operating weight of approximately 24,383 lbs, optimized for stability and control. The front axle provides 1.6 feet of ground clearance with 30 degrees total oscillation and 20 degrees wheel lean to manage uneven surfaces effectively. The hydraulic system incorporates a tandem gear pump with a flow rate of 29.1 gallons per minute and operates at a relief valve pressure of 2.5 psi, supporting fluid capacities including 29.1 gallons for hydraulics and 55.5 gallons fuel capacity. It utilizes a planetary transmission with six forward and six reverse gears, achieving top speeds of 20.3 mph forward and 20.7 mph reverse. Steering articulation allows 26 degrees for enhanced maneuverability. Standard features include a 24-volt electrical system with a 40-amp alternator, tandem case fluid capacity of 7.4 gallons per axle, and durable 13.00-24-12 tires. This motor grader balances power, precision, and functionality ideal for a variety of construction and grading applications.