CASE 686G XR SIT-DOWN FORKLIFT

The Case 686G XR forklift is a robust telehandler designed for heavy-duty lifting and material handling tasks. It features a turbocharged 4T-390 engine with a displacement of 239 cubic inches, delivering a gross power of 110 hp (82 kW) and net power of 99 hp (74 kW) at 2500 rpm, with a maximum torque of 293 lbs-ft at 1500 rpm. The engine’s turbocharged aspiration enhances performance and efficiency. The forklift’s operating weight is approximately 19,600 lbs, with dimensions including a ground clearance of 16 inches, overall height of 7.9 feet, length to fork face of 20.4 feet, and a turning radius of 12 feet outside the tires. The hydraulic system features an axial piston pump with a flow capacity of 34 gallons per minute and a fluid capacity of 40 gallons, supporting the lift system that offers a maximum forward reach of 27.9 feet and a maximum lift height of 42 feet. Its maximum lift capacity is 6,700 lbs at lower heights, with a load of 6,000 lbs at maximum height and 1,000 lbs at maximum reach, allowing versatile operation across demanding work environments. The transmission is a powershift type, providing three forward and three reverse gears, with a maximum travel speed of 21 mph (34 kph) in both directions. It runs on a 12-volt electrical system supported by a 62-amp alternator, with a fuel capacity of 35 gallons. The forklift is equipped with 13.00x24 12PR L2/G2 tires, and measures a wheelbase of 9.9 feet and a width over tires of 8.6 feet, ensuring stability and maneuverability during operation. This model combines powerful engine performance, hydraulic efficiency, and precise control for demanding lifting applications.