CASE 688G SIT-DOWN FORKLIFTS

Technical Description

The Case 688G is a turbocharged, four-cylinder telescopic forklift engineered for demanding lifting and material handling applications. Powered by a 4T-390 engine producing 110 gross horsepower (82 kW) at 2,500 rpm and 293 foot-pounds of maximum torque at 1,500 rpm, this machine delivers reliable performance across diverse job sites. The telehandler features a maximum lift capacity of 8,000 pounds with an impressive 43-foot maximum lift height, capable of maintaining 7,000 pounds at full height and 1,900 pounds at maximum forward reach of 27.9 feet. Its axial piston hydraulic pump system delivers 34 gallons per minute flow capacity, supported by a 40-gallon fluid reservoir. Dimensionally, the 688G accommodates tight job site constraints with a 12.2-foot turning radius, 16-inch ground clearance, and overall height of 7.9 feet. The boom extends to 21 feet to the fork face, while the 8.6-foot width over tires and 10.5-foot wheelbase provide stability during operation. Operating weight reaches 22,813 pounds, supported by 13.00x24 12-ply tires rated for varied terrain conditions. The powershift transmission offers three forward and three reverse gears, enabling maximum speeds of 21 miles per hour in both directions for enhanced job site mobility. Equipped with a 35-gallon fuel capacity and 12-volt electrical system with 62-amp alternator, the 688G combines mobility, lifting capability, and operational efficiency for material handling professionals.