CASE 921G WHEEL LOADER

The CASE 921G is a mid-sized wheel loader engineered for material handling and loading applications. Powered by a Tier 4 Final-compliant FPT F4HFE613R six-cylinder engine, it delivers 255 gross horsepower and 225 net horsepower with maximum torque of 958.9 lb-ft at 2000 rpm. The machine features a 4F/3R powershift transmission with selectable autoshift or manual shift capability and achieves a maximum forward speed of 22.8 mph. With an operating weight of 45,070 lbs, the 921G boasts impressive hydraulic performance powered by a piston pump delivering 42.8 gallons per minute at a maximum system pressure of 3,625 psi. The loader's bucket capacity reaches 4.8 cubic yards with a SAE breakout force of 35,273 lbs and total breakout force of 37,678 lbs, enabling efficient pile management and material handling. Hydraulic cycle times are optimized at 11.4 seconds unloaded, maximizing productivity on job sites. Dimensionally, the 921G measures 26.9 feet overall length, 11.4 feet to the top of cab, and 9.3 feet width over tires with a 19.7-foot turning radius. It maintains 1.5 feet ground clearance and achieves a dump height of 114.7 inches at full raise with 45-degree angle. The operator environment features an enclosed ROPS cab with air conditioning, heat, adjustable suspension seat, and 8-inch LCD touchscreen display with programmable electro-hydraulic controls. The 76.1-gallon fuel capacity and advanced emissions control system support extended operational endurance while meeting environmental regulations.